Solution Description
Worm Gear Operator Valve Operator Gearbox Guide Gear Box Operating Force Drinking water Regulating 3 Way Excavator CZPT s | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| NO. | Description | Material | Substance number |
| one | Bolts | Carbon Metal | ASTM A29M-1571 |
| two | Indicator Plate | Carbon Steel | ASTM A29M-1571 |
| three | O-ring | Rubber | NBR |
| 4 | Oil seal | Rubber | NBR |
| 5 | Handwheel indicator | Carbon Metal | ASTM A29M-1571 |
| 6 | Bolts | Carbon Steel | ASTM A29M-1045 |
| seven | Go over | Carbon Steel/ Ductile iron | ASTM A216 WCB/ ASTM A536 65-45-12 |
| eight | Sealing Gasket | Insulation paper | |
| 9 | Worm Gear | Ductile iron | ASTM A536 65-forty five-twelve |
| ten | Stem Bush | Carbon Metal | ASTM A29M-1571 |
| 11 | Snap Ring | Carbon Steel | ASTM A29-1566 |
| twelve | Finish Include | Carbon Steel | ASTM A29M-1571 |
| thirteen | Bearing | Alloy Metal | ASTM A295-52100 |
| 14 | Physique | Carbon Metal/ Ductile iron | ASTM A216 WCB/ ASTM A536 sixty five-forty five-12 |
| fifteen | Grease Nipple | Carbon Metal | ASTM A29M-1571 |
| sixteen | Worm | Carbon Metal | ASTM A29M-1045 |
| seventeen | Key | Carbon Metal | ASTM A29M-1045 |
| eighteen | Reduction human body | Carbon Steel/ Ductile iron | ASTM A216 WCB/ ASTM A536 sixty five-forty five-12 |
| 19 | Bolts | Carbon Steel | ASTM A29M-1045 |
| twenty | Bearing | Alloy Steel | ASTM A295-52100 |
| 21 | Gears | Carbon Metal | ASTM A29M-1045 |
| 22 | Snap Ring | Carbon Steel | ASTM A29-1566 |
| 23 | Reduction go over | Carbon Steel/ Ductile iron | ASTM A216 WCB/ ASTM A536 sixty five-forty five-12 |
| 24 | Washer of nuts | Carbon Metal | ASTM A29M-1571 |
| twenty five | Changing nuts | Carbon Metal | ASTM A29M-1045 |
| 26 | Altering Bolts | Carbon Steel | ASTM A29M-1045 |
Dimension
| DIM Design | Mounting Foundation | External Element | Input Shaft Component | Handwheel | |||||||||||||||
| Type | Flange Measurement | D1 | P.C.D | D3 | H0 | H1 | H2 | K | K1 | K2 | K3 | L | L2 | L1 | PD | KEY | M | ||
| D2 | N-H-DP | ||||||||||||||||||
| KB–1S | A | F-12 | 85 | 125 | four-M12-18 | 150 | 3 | 66 | 204 | 91 | forty eight | 51 | 220 | eighty three | 161 | 31 | 21 | 6 | 300 |
| KB-01-1S | F-14 | 100 | one hundred forty | 4-M16-24 | a hundred seventy five | four | seventy five | 225 | ninety four | forty eight | sixty one | 276 | 93 | 171 | 31 | 21 | six | 350 | |
| KB-02-1S | F-16 | 130 | one hundred sixty five | 4-M20-30 | 210 | five | ninety two | 286 | 110 | 64 | 68 | 350 | 113 | 205 | forty | 28 | 8 | 450 | |
| KB-03-1S | B | (F-twenty) | a hundred and forty | 205 | eight-M16-24 | 250 | 5 | 111 | 325 | 112 | 58 | 68 | 362 | 126 | 217 | 40 | 28 | 8 | 500 |
| KB-04-1S | F-twenty five | 200 | 254 | 8-M16-24 | three hundred | five | 144 | 383 | 124 | sixty three | a hundred | 426 | 158 | 246 | 40 | 28 | eight | 600 | |
| KB-05-1S | F-30 | 230 | 298 | 8-M20-30 | 350 | five | 160 | 453 | 143 | 71 | one zero one | 464 | 190 | 284 | 40 | 28 | 8 | 650 | |
| KB-06-1S | F-35 | 260 | 356 | 8-M30-forty five | 415 | 5 | two hundred | 525 | 169 | 91 | 119 | 498 | 224 | 318 | forty | 28 | 8 | seven-hundred | |
| KB-07-1S | B | F-40 | 300 | 406 | 8-M36-fifty four | 475 | eight | 225 | 619 | a hundred ninety | one zero one | 155 | 457 | 237 | 417 | sixty | 38 | 10 | 800 |
| KB-08-1S | F-40 | three hundred | 406 | 8-M36-50 | 475 | 8 | 270 | 668 | 201 | 102 | a hundred and fifty five | 499 | 279 | 459 | sixty | 38 | 10 | 900 | |
| KB-09-1S | C | F-forty eight | 370 | 483 | 12-M36-54 | 560 | 8 | 338 | 790 | 232 | 116 | – | 561 | 341 | 521 | 60 | 38 | 10 | 900 |
Complex Parameters
| PARA Design | Ratio | Flange Measurement (ISO5211) | Max Valve Stem dmax | Max Torque | M.A. | Weight | |
| Input | Output | ||||||
| mm | Nm | Nm | 10% | Kg | |||
| KB–1S | sixty three:one | F-12 | forty (twelve X 8) | sixty five | one thousand | sixteen.one | 19 |
| KB-01-1S | seventy four:1 | F-fourteen | 50 (14 X 9) | 100 | 1850 | 18.nine | 21 |
| KB-02-1S | 129:1 | F-sixteen | sixty (18 X eleven) | 90 | 3000 | 33 | 38 |
| KB-03-1S | 158:1 | ( F-twenty ) | 70 (20 X twelve) | 105 | 4200 | 40 | 41 |
| KB-04-1S | 179:one | F-twenty five | ninety (25 X 14) | a hundred and sixty | 6500 | forty one | 64 |
| KB-05-1S | 177:1 | F-thirty | one zero five (28 X sixteen) | 225 | 10000 | forty five | 91 |
| KB-06-1S | 201:1 | F-35 | one hundred twenty (32 X eighteen) | 295 | 15000 | 51 | 137 |
| KB-07-1S | 202:1 | F-40 | a hundred and forty (36 X 20) | 590 | 28000 | forty eight | 220 |
| KB-08-1S | 244:one | F-forty | a hundred sixty five (forty X 22) | 890 | 48000 | 54 | 290 |
| KB-09-1S | 234:1 | F-48 | a hundred ninety (45 X 25) | 1300 | 72000 | fifty six | 450 |
Remark:
input torque=output torque/M.A.
Relevant merchandise
We provides a dependable grantee for the product’ s top quality by CZPT d inspection and screening products. professional complex staff, beautiful processing technological innovation and strict management system.
In modern a long time, the organization has been building quickly by its rich encounter in generation, CZPT d management system, standardized management program, strong technical power. We constantly adhere the idea of survival by top quality, and development by innovation in science and technologies.
Our CZPT is ready to operate with you hand in hand and produce brilliance with each other!
Materials CZPT
Minimal carbon steel, C45, 20CrMnTi, 42CrMo, 40Cr, stainless metal. Can be adapted concerning CZPT er requirements.
Area treatment method
Blacking, galvanization, chroming, electrophoresis, coloration painting, …
Warmth treatment method
High frequency quenching heat therapy, hardened teeth, carbonizing, nitride, …
FAQ:
Q: Are you investing company or company ?
A: Our group is composed in 3 factories and 2 overseas product sales firms.
Q: Do you give samples ? is it free or added ?
A: Indeed, we could offer you the sample for free cost but do not spend the expense of freight.
Q: How CZPT is your supply time ? What is your phrases of payment ?
A: Typically it is forty-forty five times. The time could range relying on the item and the level of CZPT ization. For regular items, the payment is: 30% T/T in CZPT ,equilibrium just before shippment.
Q: What is the actual MOQ or price tag for your merchandise ?
A: As an CZPT organization, we can offer and adapt CZPT goods to a wide variety of wants.Therefore, MOQ and price tag might tremendously fluctuate with size, material and more requirements For instance, pricey goods or regular products will usually have a reduce MOQ. Remember to speak to us with all pertinent particulars to get the most accurate quotation.
If you have yet another question, you should truly feel free of charge to get in touch with us.
