{"id":938,"date":"2023-09-28T03:11:53","date_gmt":"2023-09-28T03:11:53","guid":{"rendered":"https:\/\/pto-gearboxes.top\/china-oem-reduction-ratio-20-1-suitable-for-pto-gearbox-for-jewelry-engraving-machine-gearbox-and-motor\/"},"modified":"2023-09-28T03:11:53","modified_gmt":"2023-09-28T03:11:53","slug":"china-oem-reduction-ratio-20-1-suitable-for-pto-gearbox-for-jewelry-engraving-machine-gearbox-and-motor","status":"publish","type":"post","link":"https:\/\/pto-gearboxes.top\/sv\/application\/china-oem-reduction-ratio-20-1-suitable-for-pto-gearbox-for-jewelry-engraving-machine-gearbox-and-motor\/","title":{"rendered":"China OEM Reduction Ratio 20: 1 Suitable for Pto Gearbox for Jewelry Engraving Machine gearbox and motor"},"content":{"rendered":"
\n
\n

Product Description<\/h2>\n

\n

\n

Product Description<\/p>\n

\n

Reduction ratio 20:1 suitable for pto gearbox for jewelry engraving machine<\/p>\n

HangZhou Fubao Electromechanical Technology Co., Ltd. \u00a0pto gearbox<\/b>
is a new generation of practical products independently developed by our company<\/p>\n

Low noise: less than 65db.<\/p>\n

Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in a double stage.<\/p>\n

High torque: higher than the standard planetary reducer torque.<\/p>\n

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.<\/p>\n

High deceleration ratio: Modular design, planetary gearbox can be interlinked.<\/p>\n

pto gearbox\u00a0<\/b>characteristic:<\/b><\/p>\n

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the\u00a0\u00a0pto gearbox <\/b>. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.<\/p>\n

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.<\/p>\n

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.<\/p>\n

4.The material of the input cover\/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.<\/p>\n

\n\n\n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n
WAB series parameters<\/td>\nModel number<\/td>\nWAB042<\/td>\nWAB60<\/td>\nWAB090<\/td>\nWAB115<\/td>\nWAB140<\/td>\nWAB180<\/td>\nWAB220<\/td>\n<\/tr>\n
Rated output torque<\/td>\n14-22<\/td>\n23-60<\/td>\n48-160<\/td>\n140-330<\/td>\n342-650<\/td>\n520-1200<\/td>\n1140-2000<\/td>\n<\/tr>\n
Reduction ratio<\/td>\nL1: 3, 4, 5, 6, 7, 8, 9, 10\u00a0\u00a0\u00a0 L2: 15, 20, 25, 30, 35, 40, 50, 70, 80, 100<\/td>\n<\/tr>\n
Planetary gear backlash<\/td>\nL1: P0\u22641 P1\u22643 P2\u22645\u00a0\u00a0 L2: P0\u22643 P1\u22645 P2\u22647<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/p>\n

Detailed Photos<\/p>\n

\n

\u00a0<\/p>\n

Product Details<\/p>\n

\n

\u00a0<\/p>\n

<\/p>\n

Other products<\/p>\n

\n

\u00a0<\/p>\n

<\/p>\n

Product Advantages<\/p>\n

\n

Compared with other reduction machines, <\/b>pto gearbox<\/b> <\/b>machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque\/volume ratio, lifetime maintenance free and other characteristics.<\/p>\n

Because of these characteristics,\u00a0pto gearbox<\/b> <\/b>is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.<\/p>\n

Company Profile<\/p>\n

\n

\u00a0<\/p>\n

<\/p>\n

\n

\n

HangZhou Fubao Electromechanical Technology Co., Ltd.<\/b> was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.<\/p>\n

The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CHINAMFG pursuit to make far-reaching contributions.<\/p>\n

\n

\n

Factory Display<\/p>\n

\n

\u00a0<\/p>\n

Q: Speed reducer grease replacement time<\/b>
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40\u00baC), please check the aging and fouling of the grease, and specify the replacement time.<\/p>\n

Q: Delivery time<\/b>
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.<\/p>\n

Q: Reducer selection<\/b>
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.<\/p>\n

Q: Application range of reducer<\/b>
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.<\/p>\n

\u00a0 <\/p>\n

\n

\n

\n\n
\n\n\n
\n Shipping Cost:<\/p>\n
\n <\/i><\/p>\n
\n
\n

Estimated freight per unit.<\/p>\n


\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>
\n\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n <\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/th>\n

\n To be negotiated\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/div>\n\n\n\n\n\n
Application:<\/th>\nMotor, Machinery, Agricultural Machinery, Medical Robot<\/td>\n<\/tr>\n
Hardness:<\/th>\nHardened Tooth Surface<\/td>\n<\/tr>\n
Installation:<\/th>\n90 Degree<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/div>\n\n\n\n
Customization:<\/th>\n\n
\n
\n Available\n <\/div>\n

|<\/span><\/p>\n

<\/i>Customized Request<\/p><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/p><\/div>\n<\/table>\n

\"pto<\/p>\n

Proper Installation and Alignment of Miter Gearboxes<\/h3>\n

Installing and aligning a miter gearbox correctly is essential to ensure its optimal performance and longevity. Follow these steps to achieve proper installation and alignment:<\/p>\n

    \n
  1. Preparation:<\/strong> Gather all necessary tools and equipment for the installation, including mounting hardware, shims, and alignment tools.<\/li>\n
  2. Mounting Surface:<\/strong> Ensure that the mounting surface is clean, flat, and free from any debris or contaminants that could affect the gearbox’s alignment and operation.<\/li>\n
  3. Alignment Tools:<\/strong> Use precision alignment tools, such as dial indicators or laser alignment systems, to accurately measure and adjust the alignment of the gearbox and its input and output shafts.<\/li>\n
  4. Check for Parallelism:<\/strong> Align the input and output shafts of the gearbox to be parallel to each other and perpendicular to the mounting surface. This step is crucial to prevent misalignment-induced wear and reduce backlash.<\/li>\n
  5. Adjustment:<\/strong> Use shims or other adjustable components to fine-tune the alignment. Make incremental adjustments while continuously checking the alignment with the chosen alignment tools.<\/li>\n
  6. Bearing Loads:<\/strong> Ensure that the bearings supporting the gearbox shafts are properly lubricated and preloaded according to the manufacturer’s recommendations. Proper bearing preload helps maintain alignment and reduces wear.<\/li>\n
  7. Tightening Bolts:<\/strong> Tighten the mounting bolts gradually and evenly to avoid introducing additional misalignment during the installation process.<\/li>\n
  8. Runout and Clearance:<\/strong> Check for any runout or clearance issues during rotation by turning the input shaft. If there is any binding, interference, or abnormal noise, investigate and address the cause before finalizing the installation.<\/li>\n
  9. Final Checks:<\/strong> Double-check the alignment using the alignment tools and ensure that the gearbox operates smoothly without any unusual vibrations, noises, or resistance.<\/li>\n
  10. Documentation:<\/strong> Keep a record of the alignment measurements and adjustments made during the installation process. This documentation can be valuable for future reference and maintenance.<\/li>\n<\/ol>\n

    Proper installation and alignment of miter gearboxes help optimize their performance, minimize wear and tear, and contribute to the overall efficiency and reliability of the mechanical system in which they are used.<\/p>\n

    \"pto<\/p>\n

    Advantages of Miter Gearboxes Over Other Gear Systems<\/h3>\n

    Miter gearboxes offer distinct advantages in certain scenarios that make them preferred over other types of gear systems:<\/p>\n

    90-Degree Motion Change:<\/strong> Miter gearboxes excel at changing the direction of motion by 90 degrees. This makes them ideal for applications where a right-angle change in motion is required.<\/p>\n

    Compact Design:<\/strong> Miter gearboxes have a compact and space-saving design, making them suitable for applications with limited space constraints.<\/p>\n

    Precision Steering:<\/strong> In automotive steering systems, miter gearboxes provide precise and accurate control over the direction of vehicles, contributing to safe and responsive steering.<\/p>\n

    Reduced Backlash:<\/strong> Miter gearboxes are designed to minimize backlash, ensuring accurate and smooth motion transfer. This makes them suitable for applications where precision and responsiveness are critical.<\/p>\n

    Customization:<\/strong> Miter gearboxes can be customized to suit specific torque, speed, and design requirements, making them adaptable to various applications.<\/p>\n

    Reliable Motion Transmission:<\/strong> Miter gearboxes provide reliable motion transmission and are often chosen for applications where consistent and accurate motion control is essential.<\/p>\n

    Low Noise and Vibration:<\/strong> The design of miter gearboxes can help reduce noise and vibration, making them suitable for applications where quiet operation is necessary.<\/p>\n

    Miter gearboxes are preferred in scenarios where their unique design and capabilities align with specific motion control and direction change requirements, offering efficiency, precision, and reliability.<\/p>\n

    \"pto<\/p>\n

    Types of Miter Gearboxes and Their Classification<\/h3>\n

    Miter gearboxes come in various types, each designed to meet specific application requirements based on factors such as gear arrangement, shaft orientation, and efficiency. They can be classified into the following main types:<\/p>\n

      \n
    • Straight Bevel Miter Gearboxes:<\/strong> These gearboxes have straight-cut teeth on the bevel gears and are suitable for applications where the intersecting shafts are positioned in the same plane. They are commonly used for changing the direction of motion between two shafts that are parallel to each other.<\/li>\n
    • Spiral Bevel Miter Gearboxes:<\/strong> Spiral bevel miter gearboxes feature spiral-cut teeth on the bevel gears, which reduces noise, vibration, and improves efficiency. They can handle higher torque and are often used in heavy-duty applications where smooth and quiet operation is essential.<\/li>\n
    • Skew Bevel Miter Gearboxes:<\/strong> Skew bevel gearboxes have skewed teeth that allow for smoother meshing and reduced wear. They are ideal for applications with high-speed rotation and heavy loads, such as machine tools and automotive systems.<\/li>\n
    • Hypoid Bevel Miter Gearboxes:<\/strong> Hypoid bevel gearboxes have hypoid-cut gears, which enable greater torque transmission and efficiency. They are commonly used in applications with higher torque requirements, such as industrial machinery and heavy equipment.<\/li>\n<\/ul>\n

      The classification of miter gearboxes is based on the type of gear arrangement, tooth profile, and other design features. Choosing the right type of miter gearbox depends on the specific application’s demands for torque, speed, efficiency, and space limitations.<\/p>\n

      \"China\"China
      editor by CX 2023-09-28<\/p>","protected":false},"excerpt":{"rendered":"

      Product Description Product Description Reduction ratio 20:1 suitable for pto gearbox for jewelry engraving machine HangZhou Fubao Electromechanical Technology Co., Ltd. \u00a0pto gearboxis a new generation of practical products independently developed by our company Low noise: less than 65db. Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[3220,1590,2070,1305,1651,1545,1655,3996,1550,2594,4,1687],"class_list":["post-938","post","type-post","status-publish","format-standard","hentry","category-uncategorized","tag-china-gearbox","tag-china-machine","tag-engraving-machine","tag-gearbox","tag-gearbox-china","tag-gearbox-machine","tag-gearbox-reduction","tag-jewelry-engraving-machine","tag-machine","tag-oem-gearbox","tag-pto-gearbox","tag-reduction-gearbox"],"_links":{"self":[{"href":"https:\/\/pto-gearboxes.top\/sv\/wp-json\/wp\/v2\/posts\/938","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pto-gearboxes.top\/sv\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/pto-gearboxes.top\/sv\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/pto-gearboxes.top\/sv\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/pto-gearboxes.top\/sv\/wp-json\/wp\/v2\/comments?post=938"}],"version-history":[{"count":0,"href":"https:\/\/pto-gearboxes.top\/sv\/wp-json\/wp\/v2\/posts\/938\/revisions"}],"wp:attachment":[{"href":"https:\/\/pto-gearboxes.top\/sv\/wp-json\/wp\/v2\/media?parent=938"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/pto-gearboxes.top\/sv\/wp-json\/wp\/v2\/categories?post=938"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/pto-gearboxes.top\/sv\/wp-json\/wp\/v2\/tags?post=938"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}