Merchandise Description
Firm Profile
Company Profile
HangZhou Xihu (West CZPT ) Dis. CZPT CZPT ry Co., Ltd., is a manufacture of precision machining from steel plates, castings & closed die forgings. It is established in 2571 12 months, covers a overall location of about 2000 sq. meters.
Around fifty men and women are used, including 4 engineers.
The company equipped with ten indirect manual CNC Lathes, 35 normal CNC lathes, 6 machining centers, other milling devices and drilling devices.
The Items include building elements, auto elements, healthcare therapy, aerospace, electronics and other fields, exported to Japan, Israel & other Asian countries and Germany, the CZPT States, Canada & other CZPT pean and CZPT ican countries.
Certificated by TS16949 quality management technique.
Products Introduction
Main facility and working selection, inspection products as comply with
| 4 axles CNC CZPT Heart | 1000mm*600mm*650mm |
| Oblique Xihu (West CZPT ) Dis. CNC CZPT | max φ800mm max duration 700mm Tolerance control in .01 One particular time clamping, substantial accuracy |
| Turning-milling Compound Machining Centre | max φ800mm max length 1000mm |
| Other CNC Lathe | Overall 30 sets |
| Inspection Tools | CMM, Projector, CZPT Scale, Micrometer |
| Profiloscope, Hardness tester and so on |
Oblique Xihu (West CZPT ) Dis. CNC Lathe
Geared up with ten sets of oblique guide CNC Lathes The maximum diameter can be 400-500 mm CZPT can achieve .01mm
Machining Middle
six sets of 4 axles machining center, max SPEC: 1300*70mm, precision can get to .01mm
About Merchandise
Good quality Control
We usually want to be exact, so verify proportions following every manufacturing step. We have senior engineers, expert CNC operator, specialist top quality inspector. All this helps make positive the closing merchandise are higher qualified.
Also can do third parity inspection accoring to CZPT er’s reequirments, such as SGS, TUV, ICAS and so on.
Callipers/Height guage
Thread guage
Go/ no go guage
Within micrometer
Exterior micrometer
Micron scale
CMM
Projector
Micrometer
Profiloscope
Hardness tester
Inspection Procedure
1. Prior to machining, the engineer will give absent the technologies card for each and every method acc. to drawing for good quality control.
two. During the machining, the personnel will examination the proportions at each phase, then marked in the technology card.
three. When machining finished, the expert testing staff will do one hundred% retesting once more.
Packing Location
In common, the merchandise will be packed in bubble wrap or divided by plywoods first of all.
Then the wrapped items will be set in the picket cases (no solid wood), which is permitted for export.
Parts can also be packed acc. to CZPT er’s prerequisite.
